This Help Article covers:
General/Overview:
⚠️ NOTE: It is recommended to set up the structure of the Sections/Plans from the Visbuild Window before attaching the Single Plan Image.
⚠️ NOTE: A Section has one Price only, so multiple Plans added to a Section roll up as one Price. If you want to display a Price for each Plan, you will need to Add a Section for each Plan.
Example. If you have a House with a Granny Flat and want to display as:
One Price - Use one Section and put both Single Plan Images on that Section
Two Prices - Use two Sections and put House on one Section and Granny Flat on the other Section
⚠️ NOTE: Single Plan Images can be PDF's, JPG's, PNG's, BMP's or GIF's
To Add a Single Plan Image
Quick Flow:
Section/Plan Selector’s Expand More Options Icon
Section > Select
Either: Drag & Drop / UPLOAD IMAGE / UPLOAD
Edit/Clean Tools
[DONE]
1. From the Visbuild Window, Press the Section/Plan Selector’s Expand More Options Icon, then Press on a Section to Select
2. From the Selected Section, to Upload the Plan Image and display the Add Plan Images Window, either:
Drag & Drop - Drag & Drop the Plan Image into the Visbuild Window
UPLOAD IMAGE - Press the Properties Panel [UPLOAD IMAGE] button and navigate to the Plan Image (does NOT Upload PDF's)
UPLOAD - Press the Visbuild Window's center bottom [UPLOAD] button and navigate to the Plan Image
3. From the Add Plan Images Window, Edit Plan as required using the Edit/Clean Tools (Bottom Right) (Crop/Box/Pen), then when finished, Press [DONE] to return to the Visbuild Window with the Plan Image loaded
⚠️ NOTE: Having loaded a Plan Image and returned to the Visbuild Window, do a [SAVE]. (If for some reason the plan is not "fit" to upload, the [SAVE] will fail).
💡 TIP: Should you upload the wrong Plan to the wrong Section/Plan (OR the Plan is changed), Drag & Drop the correct Plan into the Window over the top of the wrong Plan OR use the [REPLACE PLAN] feature. You may need to move any added Kitset Icons to suit the new Plan scaling
To Add a Plan Image from an Edit/Add Section Popup
1. From the Visbuild Window, Press the Section/Plan Selector’s Expand More Options Icon, then to display the Edit/Add Section Popup, either Press the:
“Pencil” Icon - Displays the Edit Section popup
"+" Button - Displays the Add Section Popup
2. From the Edit/Add Section popup, Edit/Enter the "Section:" and/or "Plans:" Name as required
3. From the Edit/Add Section Popup, Press the Attach Image "Paper Clip" Icon and navigate to the Plan Image to Attach
💡 TIP: When Attached the Attach Image "Paper Clip" Icon will display as an "Image" Icon
3. When finished, Press [DONE]
To Add another Single Plan Image to a Section
1. From the Edit/Add Section popup, Press [+ADD PLAN] to add a new Plans Line, then give the new Plans Line a Name, then repeat for any additional Single Plan Image you need to Upload to that Section
2. From the new Plans Line(s), Press the Attach Image "Paper Clip" Icon and navigate to the Plan Image to Attach, Pressing [DONE] when all Plan Images are Attached
OR
2A. Return to the Visbuild Window, Press on the Section/Plan Selector's Expand More Options Icon, to display the options, then Select a Plan and Upload as per the "To Load a Single Plan Image" above
To Add another Section
1. From the Visbuild Window, Press the Section/Plan Selector’s Expand More Options Icon, then Press the "+" Button of the “Add new Section/plan” Line to display the Add Section popup
2. Give the "Section:" and/or "Plans:" a Name as required
3. Add more Plans Lines as required
4. When finished, Press [DONE] to return to the Visbuild Window